Please be sure to properly assemble the hose and fittings.

When plumbing your vehicle or boat, be certain to route the hoses as far away from heat sources like the exhaust system, as possible. Secure your lines at various intervals in order to prevent them from moving.

A few drops of regular motor oil on the threads of any adapter will make installation and removal of the hose end easier. The seal of the hose end is made by the contact with the 37 degree flare. Be careful not to over-torque the hose end when installing the adapter.

A word about anodizing. At Fragola Performance Systems, we use a process called "Brite-Dip", but the anodizing process is not an exact science like painting or plating. The colors will vary from batch to batch, plus the sun, heat, & time will all cause some fading. Various alloys of aluminum will anodize with different hues.